Ol 'Steel Fibers'

Kopa-Plet Stretpela Maikro Stil Faiba

Wanpela 0.2 mm maikro faiba wantaim wanpela hot-dip kopa koting. Fopela standet model i gat 6-20 mm longpela na ol 'aspect ratios' bilong 30-100, olgeta i gat 2850 MPa (>413 ksi) 'tensile strength' - em i nambawan 'micro reinforcement unit' insait long 'high-strength' na 'ultra-high-performance concrete'.

Stretpela profail i larim wok, putim, pamim na spreim i no senis. Dispela 'fiber' i save go nabaut wankain na i no gat 'balling' na i save bung gut wantaim ol 'hooked-end' o 'wavy' 'fiber' long mekim wok i stap gut wantaim strong bilong en bihain long bruk.

• Bikpela strong, bikpela sefti — 2850 MPa strong bilong tanim wantaim bikpela 'elastic modulus' bilong strongim gut.
• Durable — Kopa koting i pas strong long 'steel core' na i no bruk; asid, alkali na sol-sprei resistens i winim tru strong bilong ol 'plain steel fiber'.
• Lait na isi long sepim — I no hevi tumas na i gat gutpela kwaliti; gutpela miks wok na wanpela klinpela pinis pes.
• Longpela sevis laip — I skruim sevis laip bilong straksa wantaim ol klia gutpela samting bilong laip olgeta.
• Kontrolim kos — Long wankain strong em i save daunim yusim bilong simen na senisim hap bilong 'rebar', na dispela i save mekim kos bilong projek i stap namel.

• I daunim yusim bilong simen long 30%-50% long wankain strong.
• Em i senisim olgeta o hap bilong 'rebar', o larim 'rebar diameter' i go daun long 1-2 mm.
• I sotim taim bilong konstraksen long moa long 25% - em i gutpela long kapsaitim wara i go i kam oltaim.
• Ol i miksim wankain olsem ol nomol simen, na i no gat ol narapela samting bilong yusim.

Long stretpela mak, strong bilong 'tensile' i go antap long 20%-50% na strong bilong 'flexural' i go antap long 40%-80%. Long nomol dosis, strong bilong 'impact compressive' i save kamap gutpela 2-7 taim na strong bilong 'impact shear/tensile' i save kamap gutpela inap sampela o planti ten taim. Gutpela 'crack control' na 'integrity' tu i save helpim 'freeze-thaw', hat, 'wear', 'cavitation' na 'corrosion resistance'.

Kopa-Plet Huk-End Stiel Faiba

Wanpela liklik 'fiber' we ol i wokim long kopa wantaim ol arere i gat huk na namel bilong en i stret. Ol huk i save pas strong long simen, na i save apim strong bilong 'tensile' na 'flexural' na 'crack resistance' antap tru long stretpela 'fiber', na i save stopim 'crack' long gro. Hot-dip kopa koting i pas strong long 'steel core' na i no save bruk bruk, na i givim 3-8 taim moa long 'acid, alkali' na 'salt-spray resistance' bilong 'plain steel fiber'.

Gutpela wok bilong strongim samting i save kamap gut taim yu kisim liklik mak: 30%-50% liklik simen long wankain strong, senisim hap bilong 'rebar' na 25% sotpela taim bilong konstraksen. Otomatik 'precision cutting' i save holim strong 'dimensional tolerance' na ol arere i no gat 'burr', olsem na 'fiber' i save go nabaut na i no gat 'balling' na i no save bagarapim wok bilong putim, pamim o spreim.

• Strongpela 'hooked anchorage' — Hukim ki strong insait long simen; strong bilong 'tensile' na 'flexural' i go antap long 40%-80% na 'crack resistance' i go antap long 60%.
• Hot-dip kopa, i save stap longpela taim — Em i wanpela strongpela 'coating' we i no gat ol 'flaking'; 3-8 taims moa long asid, alkali na sol-sprei resistans bilong ol 'plain steel fiber'.
• Likpela mak, gutpela wok — 30%–50% liklik simen long wankain strong, senisim hap 'rebar' na 25% sotpela saikel.
• Em i stret na inap long wok — Otomatik 'precision cutting' i save givim strongpela 'tolerance' na ol arere i no gat 'burr'; i save go nabaut na i no gat 'balling' na i no nidim senis long ol ikwipmen.
• Stebol, trasebel kwaliti — 28 in-lain inspeksen step long wanpela otomatik lain; ol 'sample runs' na 'volume customization' i sapotim.

Ol 'fiber' we i no stret i save kamapim wanpela 'tri-dimensional' bris na ol 'hooked end' i save givim strongpela 'anchorage'. Strong bilong 'tensile' i go antap 20%-50% na strong bilong 'flexural' i go antap 40%-80%; long nomol dosis 'impact compressive toughness' i save kamap gutpela 2-7 taim na 'impact shear/tensile toughness' i go antap planti o planti taim.

Copper-Plated Wavy Steel Fiber

Wanpela 'copper-plated micro fiber' wantaim wanpela 'wavy' (corrugated) profail. Ol weiv i save mekim 'contact area' na 'mechanical interlock' wantaim 'matrix' i go antap tru, na i save apim strong bilong 'bond' 30%-50% antap long stretpela 'fiber', na i save pasim ol 'micro-cracks' pastaim na i save mekim 'flexural', 'shear', 'impact' na 'fatigue' wok i kamap gutpela wantaim.

Ol 'corrugations' i save spredim stres na daunim stres konsentresen. Ol wankain mak na ol ples we i no gat ol 'burr' i min olsem ol 'fiber' i save bruk nabaut na i no gat 'balling', i no nidim 'dispersant' na i wok wantaim ol standet miksa na i no bagarapim wok.

• Wavy anchorage, crack control — Bikpela hap bilong kontek na intalok; strong bilong bon 30%-50% antap long stretpela 'fiber' na gutpela 'bridging' bilong ol liklik bruk.
• Gutpela 'dispersion' — Yunifom, i no gat 'burr' na i no gat senis; i save go nabaut na i no gat 'balling', i no nidim wanpela 'dispersant' na i no save bagarapim wok.
• Stebol mekanik pefomens — Ol 'corrugations' i save daunim 'stress concentration'; strongpela strong bilong sakim asid, alkali, ais-tait na 'scour'.
• Economical — Em i senisim olgeta o hap hap bilong 'welded mesh' na 'thin rebar', rausim wok bilong pasim, weldim na putim na daunim pe bilong wokman na ol samting bilong wokim.
• Gutpela korosen resistens — Hot-dip kopa leia i pas strong, na givim 3-8 taim sol-sprei na kemikel resistens bilong plein steel faia.

Dispela 'wavy profile' i save mekim 'contact area' i go antap na i save kamapim strongpela 'mechanical interlock', na i save apim strong bilong 'bond' 30%-50% antap long 'plain straight fiber'; strong bilong 'tensile' i go antap 20%-50%, strong bilong 'flexural' i go antap 40%-80%, na strong bilong 'impact' i go antap tru.

Cold-Drawn Low-Carbon Steel Wire Fiber

Ol i save pulim 'low-carbon steel wire' long kol long moa long 10-pela rot bilong stretim straksa bilong en, na bihain ol i katim na hukim long tupela arere bilong en. Strong bilong 'tensile' em 800-1150 MPa wantaim liklik senis insait long wanpela spesifikesen; dispela 'fiber' i save stap laip long tripela 'bend' na i no bruk na i save apim 'crack' na 'flexural' pefomens long 30%-50%.

Ol 'hooked end' i save pas strong insait long simen, na i save givim 40% moa 'bond' winim 'straight fiber' na i save stopim ol 'crack' long gro aninit long hevi na bikpela hevi. Dispela 'low-carbon wire base' i save bosim pe bilong en - long wankain strong klostu 20% liklik 'fiber' i nidim winim 'milled fiber' - na i stret long olgeta samting stat long nomol simen i go inap long RPC/UHPC. Yu ken senisim longpela, diamita na koting; ol i save salim sampela samting insait long 1-3 de na ol volium oda insait long 15-20 wok de.

• Cold-drawn, stebol strong — Moa long tenpela droing pas i stretim straksa; 800-1150 MPa wantaim aninit long 5% senis na nogat bruk bihain long tripela ben.
• Hooked anchorage, stronger bond — Ol huk ki i pas strong insait long simen, na givim 40% moa bond winim stretpela 'fiber' na stopim ol 'crack' long gro.
• Hai veliu, bikpela fit — Bes bilong waia we i no gat planti kabon i save daunim prais; samting olsem 20% liklik 'fiber' winim ol 'milled' long wankain strong, stat long nomol simen i go inap long RPC/UHPC.
• Isi long putim — Ol i miksim olsem simen nating na i no gat sampela samting moa; i gutpela long pamim, spreim na prekasting.
• Fleksibel saplai — 28 otomatik inspeksen step; ol sempel insait long 1-3 de, volium insait long 15-20 de, wantaim longpela, diamita na koting kastomaisesen.

• I daunim yusim bilong simen long 30%-50% long wankain strong.
• Em i rausim olgeta o hap bilong nid bilong 'rebar', o larim 'rebar diameter' i go daun long 1-2 mm.
• I sotim taim bilong konstraksen long 25% - em i gutpela long kapsaitim wara i go i kam hariap.
• Ol i miksim wankain olsem ol narapela simen, na i no gat ol narapela samting bilong yusim.

Long stretpela mak, strong bilong 'tensile' i go antap 20%-50% na strong bilong 'flexural' i go antap 40%-80%; long nomol dosis impak strong bilong presim i save kamap gutpela 2-7 taim. Ol 'fiber' i save stopim 'crack' long stat, daunim sais na namba bilong ol 'crack sources', pasim 'crack' long go bikpela aninit long lod na daunim hevi long ol 'crack tip'.

Glued Bundle Steel Wire Fiber

Wankain 'steel wire fiber', ol i gluim long wanpela lain longpela bilong en wantaim wanpela 'adhesive' we i ken kapsait long wara. Ol i putim dispela 'bundle' olsem wanpela samting, na bihain 'adhesive' i kapsait long wara na ol 'fiber' i go nabaut gen - nogat 'balling', nogat 'tangling', na 'distribution uniformity' i winim 40% gutpela moa long 'loose fiber'. Em i gutpela long ol wok bilong pamim, spreim na prekast prodaksen lain.

Ol 'hooked end' i givim strongpela 'anchorage' taim ol 'fiber' we i no stret i kamapim wanpela 'tri-dimensional bridge': 'crack resistance' i kamap gutpela 3-5 taim, 'impact' na 'fatigue' strong 1.8-2.5 taim, na 'impermeability' i kamap long P8-P12. Dispela glu i save kapsait long wara na i no nidim moa wok; putim drai long abrusim wara na 'caking' long ol bagarap paket.

• Superior dispersion — Row form na wara-solubel glu; ol 'fiber' i save bruk wanwan taim glu i kapsait, wantaim moa long 40% gutpela yunifomiti winim ol 'loose fiber'.
• Strongpela anka na strongim — Ol huk pinis i anka strong; 3D bridging i save apim 'crack resistance' 3-5 taim, strong bilong 'impact' na 'fatigue' 1.8-2.5 taim na i no inap long go insait long P8-P12.
• Gutpela plesmen — Nogat ekstra ikwipmen; putim wantaim ol 'aggregates' na skruim taim bilong miksim inap 30-60 seken. Senisim hap bilong 'mesh', rausim wok bilong pasim na katim 'cycle' long 20%-30%.
• Kontrolim kos — Stretpela mak bilong marasin (0.3%–0.8% long volium), bikpela yusim bilong ol samting, liklik kos moa long konvensenel mesh riinfosmen na liklik kos bilong lukautim.
• Bikpela aplikesen — Ol i save yusim long ol rot bilong haiwe, ol rot bilong ples balus, ol bris dek, ol ekspansen join na ol infrastraksa bilong lukautim wara.

• I daunim yusim bilong simen long 30%-50% long wankain strong.
• Em i rausim olgeta o hap bilong nid bilong 'rebar', o larim 'rebar diameter' i go daun long 1-2 mm.
• I sotim taim bilong konstraksen long 25% - em i gutpela long kapsaitim wara i go i kam hariap.
• Ol i miksim wankain olsem ol narapela simen, na i no gat ol narapela samting bilong yusim.

Long stretpela mak, strong bilong 'tensile' na 'flexural' i go antap long 20%-50% na 40%-80% wanwan; long nomol dosis 'impact compressive toughness' i save kamap gutpela 2-7 taim na 'impact shear' na 'tensile toughness' i save kamap gutpela moa inap planti taim. Gutpela 'crack control' na 'integrity' tu i save helpim 'freeze-thaw', hat, 'wear', 'cavitation' na 'corrosion resistance'.

Ingot-Milled Steel Fiber

Ol i wokim long strongpela 'manganese-alloy cast steel' long bikpela 'milling'. Dispela wok bilong katim i save senisim na tanim tanim 'fiber', na i save larim ol arere i gat ol rop long en long tupela hap, na wanpela 'anchor tail' long tupela arere, wantaim wanpela blupela 'anti-rust finish' na wanpela 'triangular cross-section'.

Ol 'serrated edges' na 'anchor tail' i save helpim gut 'interfacial bond' wantaim 'concrete matrix', na i save apim strong bilong 'flexural-tensile' 20%-50% na 'crack resistance' 3-4 taim. Resistans bilong wear i go antap long 40% na strong bilong 'flexural fatigue' i go antap long 1.65-2.25 taim. Long liklik mak (0.25%-0.8% long volium) ol 'fiber' i no save kamap bal na i save miks isi, na i gutpela long miksim, pamim na spreim long ples.

• Strongpela pasin bilong pas — Ol arere i gat ol rop na tel bilong anka i save helpim gut pasin bilong pas gut wantaim; strong bilong 'flexural-tensile' i go antap 20%-50% na 'crack resistance' i go antap 3-4 taim.
• Gutpela dispersen — Long liklik mak (0.25%–0.8% long volium) em i no save bal na miks isi, na i gutpela long miksim, pamim na spreim long ples.
• I strong na strongim — 'Wear resistance' i kamap gutpela inap 40%, strong bilong 'flexural fatigue' i go antap 1.65-2.25 taim, na i gat bikpela senis long 'impact toughness'.
• I isi long putim — Em i wok wantaim olgeta rot bilong putim na i no nidim sampela moa samting; ol i ken miksim, pamim na spreim long ples, na i no gat 'fiber' i go het na i no gat ples i stap ples klia.
• Isi long mekim simen i kamap strong — Ol samting bilong mekim i kamap strong i wankain olsem nomol simen; em i gutpela tru long wokim ol 'paving' long bikpela hap na i save sotim taim bilong konstraksen.

Long stretpela dosis strong bilong 'tensile' i go antap 20%-50% na strong bilong 'flexural' i go antap 40%-80%. Long nomol 'fiber content', 'impact compressive toughness' i save kamap gutpela 2-7 taim na 'impact shear' na 'tensile' i save kamap gutpela moa inap planti taim. Gutpela 'crack control' na 'integrity' tu i save helpim 'freeze-thaw', hat, 'wear', 'cavitation' na 'corrosion resistance'.

Milled Corrugated Steel Fiber

Ol i wokim long strongpela ain na ol i wokim long dispela 'fiber', na dispela 'fiber' i gat wanpela kain 'corrugated profile' we i mekim em i narakain long ol 'plain straight fibre'. Ol 'corrugations' i save mekim 'contact area' wantaim simen i go antap tru, na dispela i save kamapim strongpela 'mechanical interlock' na 'anchorage' - strong bilong 'bond' 30%-50% antap long 'plain straight fiber' - na i save pasim na pasim ol liklik bruk.

Ol i wokim long gutpela 'carbon structural steel', na strong bilong en i stap wankain olsem ≥600 MPa wantaim ol bikpela strong gred we i save kamap long 700-800 MPa; strongpela samting i no inap bruk. Ol 'corrugations' i save spredim stres na daunim stres konsentresen, wantaim strongpela resistens long asid, alkali, friz-thaw na skoa. Dispela 'fiber' inap long senisim olgeta o hap bilong 'welded mesh' na 'thin rebar', na rausim wok bilong pasim, weldim na putim na abrusim simen i bruk bikos 'rebar' i bagarap.

• Strongpela tru 'mechanical anchorage' — Ol 'corrugations' i save mekim 'contact area' i go antap na i save apim strong bilong 'bond' 30%-50% antap long 'plain straight fiber', na dispela i save daunim tru hevi bilong bruk.
• Gutpela 'dispersion' — Ol wankain sais na longpela, i no gat ol 'burr'; i save go nabaut na i no gat 'balling', i no nidim wanpela 'dispersant' na i no save bagarapim 'flow' o 'compaction'.
• Stebol na strongpela — ≥600 MPa strong bilong tanim insait long wanpela strongpela samting we i no inap bruk wantaim strongpela strong bilong sakim asid, alkali, ais-tait na 'scour'.
• Ekonomik rebar riplesmen — Senisim ol 'welded mesh' na 'thin rebar', rausim wok bilong pasim, weldim na putim na abrusim 'corrosion-induced spalling'.
• Ol i wokim bilong ol hatpela kondisen — Em i gutpela long ol ples we i gat ren longpela taim, i gat planti wara na i gat planti hevi, na dispela i save mekim sevis i stap longpela taim na i no gat bikpela pe bilong lukautim.

Dispela 'corrugated structure' i save mekim 'contact area' i go antap na i save kamapim 'mechanical interlock', na i save apim strong bilong 'bond' 30%-50% antap long 'plain straight fiber'. Pefomens bilong 'flexural', 'shear', 'impact' na 'fatigue' olgeta i kamap gutpela, 'crack propagation' i no inap kamap na 'overall structural toughness' i go antap.

304 Stainless Steel Fiber

Wanpela liklik 'fiber' we ol i kisim long 304 'stainless steel'. Em i save sakim ol asid, alkali, sol sprei na ros gutpela moa long ol 'copper-plated fiber' - sol-sprei tes i soim olsem strong bilong en i lus 5.6% bihain long 180 de - na dispela i mekim em i gutpela long ol ples we i gat planti solwara. Em i save sanap strong long 650°C na tu i save karim gut hat na pawa, olsem na bihain long strongim simen em i gutpela long ol indastrial aplikesen wantaim ol spesel 'thermal' o 'conductive' rikwaemen.

Klasik stretpela profail i larim UHPC i putim, pamim na spreim i no gat hevi; ol 'fiber' i save go nabaut wankain na i no gat 'balling' na 'slump loss' i liklik. Droim bilong ol 'bundle' i givim wanpela laitpela pes na stretpela 'dimensional tolerance' we i no gat ol 'burrs' o 'breakage', na 28 otomatik inspeksen step i mekim olgeta 'batch' i stap wankain.

• 304 beis, gutpela korosen resistens — Gutpela 304 steinles stiel i no inap long kisim asid, alkali, sol sprei na ros; 5.6% tasol strong bilong en i lus bihain long 180 de bilong sol-sprei tes.
• Stretpela profail, isi long putim — I no gat hevi long putim, pamim na spreim UHPC; i save go nabaut wankain na i no gat 'balling' na i no gat planti 'slump loss'.
• I no inap hat na i save karim pawa — Em i save sanap strong long 650°C na i save karim gut hat na pawa, na i gutpela long ol indastriel aplikesen wantaim ol spesel 'thermal' o 'conductive' rikwaemen.
• Stretpela na wankain — Droim bilong ol 'bundle' i givim wanpela laitpela pes na strongpela 'dimensional tolerance' we i no gat ol 'burrs' o 'breakage'; 28 step bilong sekim i save mekim ol 'batch' i stap wankain.
• Ol i wokim long oda — Ol i ken stretim longpela na bikpela bilong en; fri sempel, 1-3 de dispatch bilong ol liklik ran na stebol volium saplai.

Gutpela 304 'stainless steel base' i save givim gutpela 'corrosion' na 'heat resistance', na 'straight profile' i save lukautim wok na i save helpim 'tensile', 'crack-control' na 'durability' pefomens; 5.6% tasol strong bilong en i lus bihain long 180 de bilong sol-sprei tes.

Steinles Stiel Maikro-Waia Faiba

Stainless steel micro-wire fiber bilong 0.12-0.3 mm diamita. Ol standet longpela em 6-20 mm na ol i ken katim waia i go long 6-60 mm sapos yu askim. Strong bilong 'tensile' i stap namel long 2000-2850 MPa wantaim 200 GPa 'elastic modulus' - em i nambawan strong namel long ol 'micro reinforcement units'.

Gutpela 'diameter' i larim ol 'fiber' i go aut wankain insait long ol 'thin-wall elements', 'precision mortars' na 'ultra-high-performance concrete' na i no bagarapim 'flow' o 'forming accuracy', na tu i holim yet 'inherent corrosion resistance' bilong 'stainless steel'.

• Ultra-fine diameter — 0.12–0.3 mm micro-wire i save go nabaut wankain long ol liklik wol element na ol 'precision mortar' na i no bagarapim 'forming accuracy'.
• Bikpela strong — Strong bilong 2000-2850 MPa na 200 GPa 'elastic modulus' — em i nambawan strong namel long ol 'micro reinforcement units'.
• Ol samting bilong 'stainless steel' — Em i holim strong bilong 'stainless steel' long taim bilong wet na korosen ples.
• Yu ken stretim longpela bilong en — Standet 6-20 mm, katim i go long 6-60 mm sapos yu askim long stretim ol kain kain tiknes na proses bilong ol samting.

Dispela 'ultra-fine stainless micro-wire' i kamapim wanpela strongpela 'three-dimensional network' insait long 'matrix', na i mekim gutpela 'tensile', 'crack-control' na 'durability' pefomens na tu i holim gutpela 'dispersion' insait long ol 'thin-wall' na 'precision elements'.

Stainless Steel Faiba we i no inap long hat na i melt

Ol i wokim long gutpela 'heat-resistant stainless steel' long rot bilong 'melt extraction', na i kamapim wanpela 'irregular three-dimensional fiber'. Em i save wok strong long ol 'refractory concrete' na ol 'high-temperature castables', we i save bungim 'heat resistance', 'thermal-shock resistance', 'corrosion resistance' na 'spalling resistance'. Olgeta spesifikasen i bihainim ol standet bilong indastrial refraktori, na dispela i mekim em i kamap wanpela bikpela samting bilong strongim ol wok bilong hai-temperature refrakteri long metaluji, pawa jeneresen na ol kemikel.

Dispela 3D straksa we i no stret i pas wantaim 'refractory matrix' gutpela moa long 'straight fiber', na i save mekim strong bilong 'flexural' na 'impact' i kamap gutpela moa na i no save bruk na bruk long bikpela hat. Dispela 'fiber' i wankain olsem 'thermal expansion' bilong 'refractory base' klostu tru, olsem na em i no soim bikpela senis o bruk aninit long hariap hat na kol na em i save kisim gut 'thermal stress', na dispela i mekim laip bilong 'lining' i go longpela moa.

• Melt-extracted, strong anchorage — Dispela 3D straksa i no stret i pas wantaim simen na ol samting we i no inap kukim paia na i gutpela moa long stretpela 'fiber', na dispela i mekim strong bilong 'flexural' na 'impact' i kamap gutpela moa na i no inap bruk na bruk long bikpela hat.
• I no inap long hat na korosen, planti gret — 304 olsem standet, wantaim 310S/2520 hai-hat gret ol i wokim long oda bilong namel i go long bikpela hat tru, na i no inap long kisim asid na alkali.
• Gutpela 'thermal shock resistance' — Klostu 'thermal expansion match' wantaim 'refractory base' i min olsem i no gat bikpela senis o bruk aninit long hariap hat na kol.
• Workable — Yunifom, i no gat 'burr' na i no gat 'balling'; ol i ken putim stret long ol 'refractory castables', 'ramming mixes' na 'gunning mixes' na i no bagarapim 'flow' o 'forming'.
• Ol i wokim long oda — Ol samting, diamita na longpela bilong en i ken stret long tempereja, korosen na ples bilong en; ol 'sample run' hariap na 'volium supply' i stap gut.

Ol 3D faiba we i no stret i save pas strong insait long 'refractory matrix', na dispela i save helpim strong bilong 'flexural' na 'impact' na i no save bruk na bruk long bikpela hat. Em i save kisim tu 'thermal stress' na i wankain olsem 'base thermal expansion', na dispela i save mekim 'refractory lining' i stap laip.

UHPC Sintetik Faiba

Wanpela non-metalik monofilamen sintetik faia we ol i wokim bilong ol UHPC miks, 100-300 μm long diamita, wantaim 967-1175 MPa tensile strong na 99% alkali resistens bilong longpela taim stebiliti insait long ol strongpela alkaline simen sistem. Melting point em 165°C, hat defleksen tempereja aninit long lod 105°C na sevis tempereja −45 i go long 95°C. Ol i tok orait long kisim 1%-3% long volium, o 14.2-42.6 kg/m3.

Taim ol i yusim wantaim 'steel fiber' dispela i save helpim moa yet long bosim ol 'crack' na i no gat hevi na i save daunim pairap bilong pairap long taim bilong bikpela hat - wanpela 'common companion fiber' bilong ol 'ultra-high-performance concrete', ol 'thin-wall precast elements' na ol samting we i no inap paia.

• Laitweit — Density bilong en em 1.41 g/cm3 tasol, aninit tru long 'steel fiber', olsem na em i no putim hevi long dispela samting.
• Hai alkali resistens — 99% alkali resistens bilong longpela taim stebiliti insait long strongpela alkaline simen sistem we i no gat lus long pefomens.
• Bikpela tempereja — Sevis tempereja −45 i go long 95°C wantaim 165°C melting poin, i stret long nomol na stim kiuring.
• Gutpela 'dispersion' — Monofilament fom i save 'dispersion' wankain na i no gat 'balling' na i no save pasim wok bilong putim o pamim.
• I bung wantaim 'steel fiber' — Taim yu miksim wantaim 'steel fiber' dispela i save helpim yu long bosim gut ol 'crack' na i no save pairap taim yu hat tumas.

Dispela non-metalik monofilamen i kamapim wanpela tripela-dimensenel netwok insait long 'matrix', na i pasim plastik long surik na bruk taim em i liklik yet. Taim ol i miksim wantaim 'steel fiber' dispela i save helpim moa yet long bosim ol 'crack' na daunim 'explosive spalling' long bikpela hat.